This guide shows you how to reset your ZTE F660RV1 router to factory default settings. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. The following settings in your router will be changed:
- The router's login credentials are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other ZTE F660RV1 Guides
This is the reset router guide for the ZTE F660RV1 Digi. We also have the following guides for the same router:
Recover Password in ZTE F660RV1
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the ZTE F660RV1
You can usually find a small reset button on either the back or the bottom of a router. Look for something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Don't forget, this step will totally reset your ZTE F660RV1 router back to factory settings.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the ZTE F660RV1
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our F660RV1 Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other ZTE F660RV1 Guides
This isn't our only ZTE F660RV1 guide. We also have the following guides for this router.
This is the reset router guide for the ZTE F660RV1 Digi. We also have the following guides for the same router: