In this article, you will learn how to reset your ZTE F670 back to factory settings. A router reset is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. However, when you reset a router you, return it back to its factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.
- The router's username and password are reset.
- All WiFi settings are reset, including network name and password.
- Your ISP username and password will be reset, and you may have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other ZTE F670 Guides
This is the reset router guide for the ZTE F670 v1.1.10P3T21. We also have the following guides for the same router:
- ZTE F670 v1.0.10P1T22 ZEOP - ZTE F670 Screenshots
- ZTE F670 v1.0.10P1T22 ZEOP - Information About the ZTE F670 Router
- ZTE F670 v1.0.10P1T22 ZEOP - Reset the ZTE F670
- ZTE F670 v1.0.10P1T22 ZEOP - Login to the ZTE F670
Recover Password in ZTE F670
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
If you are unable to recover your lost router password, then you may have to proceed with a full router reset.
Reset the ZTE F670
You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Keep in mind that this will completely reset your ZTE F670 router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the ZTE F670
Now you need to log in using the factory default username and password. You can find all of the information that you need in our F670 Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a note and tape it to the bottom of your router for future reference.
Other ZTE F670 Guides
If you want additional help with your ZTE F670 be sure to check out some of our other guides.
This is the reset router guide for the ZTE F670 v1.1.10P3T21. We also have the following guides for the same router:
- ZTE F670 v1.0.10P1T22 ZEOP - ZTE F670 Screenshots
- ZTE F670 v1.0.10P1T22 ZEOP - Information About the ZTE F670 Router
- ZTE F670 v1.0.10P1T22 ZEOP - Reset the ZTE F670
- ZTE F670 v1.0.10P1T22 ZEOP - Login to the ZTE F670