Reset the ZTE H288A

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the ZTE H288A router. This is not the same thing as rebooting a router. A reboot happens every time a router loses power. This is different from a reset because a reset completely erases all settings from the router.

Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:

  • The router's username and password are reset.
  • All WiFi settings are reset, including network name and password.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other ZTE H288A Guides

This is the reset router guide for the ZTE H288A v1.1.0_GR5.1T16 Nova. We also have the following guides for the same router:

Recover Password in ZTE H288A

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the ZTE H288A

You can usually find a small reset button on either the back or the bottom of a router. Look for something that looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Remember, this will erase everything you have previously done to this ZTE H288A router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the ZTE H288A

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can find all of the information that you need in our H288A Login Guide.

Change Your Password

Do not forget to change your router's default password when you log back into it. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.

Other ZTE H288A Guides

If you want additional help with your ZTE H288A be sure to check out some of our other guides.

This is the reset router guide for the ZTE H288A v1.1.0_GR5.1T16 Nova. We also have the following guides for the same router: