Setup Router logo in white Setup router name logo in white
Get Software

Reset the ZTE H369A

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This article covers how to reset the ZTE H369A router back to factory default settings. This is not the same thing as rebooting a router. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.

Warning: Before you continue, there are a few things you need to know. A router reset will affect the following settings:

  • The router's login and password are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any parental controls, firewall settings, or port forwards will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other ZTE H369A Guides

This is the reset router guide for the ZTE H369A v1.0.2_TL1T6v1 Tele2. We also have the following guides for the same router:

Recover Password in ZTE H369A

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

A router reset should be the last thing you try if you are unable to login.

Reset the ZTE H369A

Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:

Router Reset Button

Even though yours may look slightly different, you need to look for a tiny button. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Keep in mind that this will completely reset your ZTE H369A router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the ZTE H369A

After you are finished resetting your router, you need to login in using the original factory username and password. You can follow the H369A Login Guide to find everything that you need to log in.

Change Your Password

You need to change your router's default password after you log in for the first time. The factory default passwords for routers are very well known. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other ZTE H369A Guides

Here are some of our other ZTE H369A guides that you might be interested in.

This is the reset router guide for the ZTE H369A v1.0.2_TL1T6v1 Tele2. We also have the following guides for the same router: