This page shows how to change the LAN IP Address on the ZTE MF28B router.
Other ZTE MF28B Guides
This is the ip address guide for the ZTE MF28B Rogers. We also have the following guides for the same router:
- ZTE MF28B Rogers - Reset the ZTE MF28B
- ZTE MF28B Rogers - ZTE MF28B Login Instructions
- ZTE MF28B Rogers - How to change the DNS settings on a ZTE MF28B router
- ZTE MF28B Rogers - Setup WiFi on the ZTE MF28B
- ZTE MF28B Rogers - ZTE MF28B Screenshots
- ZTE MF28B Rogers - Information About the ZTE MF28B Router
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The ZTE MF28B
To get started configuring the ZTE MF28B LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the ZTE MF28B, follow our ZTE MF28B Login Guide.
Change the LAN IP Address on a ZTE MF28B
If you followed our login guide above then you should see this screen.
By now you have logged into the ZTE MF28B Rogers and are on the Home page of your router. To change your LAN IP Address, the address you see when inside your home network, click the choice along the top of the page labeled Settings.
A new page comes up with a list of links along the left side of the screen. Click the option of Advanced, then Router.
Configure the LAN section of your ZTE MF28B
You should now be on the LAN Interface Setup. Enter your new IP Address you have picked out for your router in the box labeled IP Address. We recommend using an address such as 192.168.1.1 or 192.168.0.1
Everything else on this page should remain as it is. The Subnet Mask should be at 255.255.255.0 and the DHCP Type should be enabled.
Click the Apply button when you are finished.
You did it!
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other ZTE MF28B Info
Don't forget about our other ZTE MF28B info that you might be interested in.
This is the ip address guide for the ZTE MF28B Rogers. We also have the following guides for the same router:
- ZTE MF28B Rogers - Reset the ZTE MF28B
- ZTE MF28B Rogers - ZTE MF28B Login Instructions
- ZTE MF28B Rogers - How to change the DNS settings on a ZTE MF28B router
- ZTE MF28B Rogers - Setup WiFi on the ZTE MF28B
- ZTE MF28B Rogers - ZTE MF28B Screenshots
- ZTE MF28B Rogers - Information About the ZTE MF28B Router