If you need to reset your ZTE ZXDSL 831AIIv3 router back to factory settings, then this article shows you how. Resetting a router is different than rebooting a router. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:
- The router's username and password are reset.
- Your WiFi login, password, and network name are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other ZTE ZXDSL 831AIIv3 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the ZTE ZXDSL 831AIIv3. We also have the following guides for the same router:
Recover Password in ZTE ZXDSL 831AIIv3
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the ZTE ZXDSL 831AIIv3
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
On most routers you can find a small button on the back or the bottom labeled reset. Look at your router and try to find something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will erase everything you have previously done to this ZTE ZXDSL 831AIIv3 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the ZTE ZXDSL 831AIIv3
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. Our ZXDSL 831AIIv3 Login Guide has all of the information that you need.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other ZTE ZXDSL 831AIIv3 Guides
This isn't our only ZTE ZXDSL 831AIIv3 guide. We also have the following guides for this router.
This is the reset router guide for the ZTE ZXDSL 831AIIv3. We also have the following guides for the same router: