In this article, you will learn how to reset your ZTE ZXHN H108N Bayan back to factory settings. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Before you continue, there are a few things you need to know. The following settings will be changed in your router:
- The router's login and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other ZTE ZXHN H108N Bayan Guides
This is the reset router guide for the ZTE ZXHN H108N Bayan. We also have the following guides for the same router:
Recover Password in ZTE ZXHN H108N Bayan
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the ZTE ZXHN H108N Bayan
Most routers have a small button on either the back or the bottom. This is what a typical reset button looks like:
Even though yours may look slightly different, you need to look for a tiny button. You may need a paper clip to push the reset button.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Just don't forget that this will totally reset your ZTE ZXHN H108N Bayan router.
Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.
Login to the ZTE ZXHN H108N Bayan
Now you need to log in using the factory default username and password. You can follow the ZXHN H108N Bayan Login Guide to find everything that you need to log in.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. It is a huge security risk to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other ZTE ZXHN H108N Bayan Guides
We have collected a lot of information about the ZTE ZXHN H108N Bayan router. You can find some of our additional content here.
This is the reset router guide for the ZTE ZXHN H108N Bayan. We also have the following guides for the same router: