This guide shows you how to reset your ZTE ZXHN H108N v2.5 router. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.
Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:
- The router's login credentials are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- All ISP settings will reset to default, and you may have to contact your ISP.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other ZTE ZXHN H108N v2.5 Guides
This is the reset router guide for the ZTE ZXHN H108N v2.5 v2.5.6 Forthnet. We also have the following guides for the same router:
Recover Password in ZTE ZXHN H108N v2.5
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the ZTE ZXHN H108N v2.5
You can usually find a small reset button on either the back or the bottom of a router. Most reset buttons look like this:
Yours may look slightly different, but they are usually tiny. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Remember, this will totally reset your ZTE ZXHN H108N v2.5 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ZTE ZXHN H108N v2.5
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our ZXHN H108N v2.5 Login Guide.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other ZTE ZXHN H108N v2.5 Guides
We have collected a lot of information about the ZTE ZXHN H108N v2.5 router. You can find some of our additional content here.
This is the reset router guide for the ZTE ZXHN H108N v2.5 v2.5.6 Forthnet. We also have the following guides for the same router: