If you need to reset your ZTE ZXHN H268A router back to factory settings, then this article shows you how. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:
- The router's login credentials are reset.
- Your WiFi name and password are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any port forwards, firewall settings, or parental controls that you have configured will be removed.
A router reset is the last step you should take in recovering your router's password. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other ZTE ZXHN H268A Guides
This is the reset router guide for the ZTE ZXHN H268A v1.0.1_ETL.1T2. We also have the following guides for the same router:
Recover Password in ZTE ZXHN H268A
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the ZTE ZXHN H268A
Most routers have a small button on either the back or the bottom. Most reset buttons look like this:
Even though yours may look slightly different, you need to look for a tiny button. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Hold the reset button down for 10 seconds and watch the lights. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Don't forget, this step will totally reset your ZTE ZXHN H268A router back to factory settings.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ZTE ZXHN H268A
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the ZXHN H268A Login Guide to find everything that you need to log in.
Change Your Password
Be sure to change your router's default password after you get logged back in. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other ZTE ZXHN H268A Guides
This isn't our only ZTE ZXHN H268A guide. We also have the following guides for this router.
This is the reset router guide for the ZTE ZXHN H268A v1.0.1_ETL.1T2. We also have the following guides for the same router: