In this article, you will learn how to reset your ZTE ZXHN H268Q v7.0 back to factory settings. This is not the same thing as rebooting a router. Every time your router loses power it reboots. A Router Reset completely erases the router and returns it to factory settings.
Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:
- The router's login credentials are reset.
- All WiFi settings are reset, including network name and password.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any parental controls, firewall settings, or port forwards will be removed.
Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other ZTE ZXHN H268Q v7.0 Guides
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the ZTE ZXHN H268Q v7.0 v7.0.0C5_CYP Cyta. We also have the following guides for the same router:
Recover Password in ZTE ZXHN H268Q v7.0
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the ZTE ZXHN H268Q v7.0
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Hold the reset button down for 10 seconds and watch the lights. The lights on the front of the router should do something different when the reset happens. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Remember, this will erase everything you have previously done to this ZTE ZXHN H268Q v7.0 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ZTE ZXHN H268Q v7.0
After you are finished resetting your router, you need to login in using the original factory username and password. You can find all of the information that you need in our ZXHN H268Q v7.0 Login Guide.
Change Your Password
Do not forget to change your router's default password when you log back into it. Leaving a router password set to default is a very serious security risk. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other ZTE ZXHN H268Q v7.0 Guides
Here are some of our other ZTE ZXHN H268Q v7.0 guides that you might be interested in.
This is the reset router guide for the ZTE ZXHN H268Q v7.0 v7.0.0C5_CYP Cyta. We also have the following guides for the same router: