This guide shows you how to reset your ZTE ZXHN H288A router to factory default settings. A router reset is very different than a router reboot. Turning a router off and back on again causes a reboot. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Proceed with caution; resetting your router can be a major headache. When you reset your router, the following will happen.
- The router's username and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- All ISP settings will reset to default, and you may have to contact your ISP.
- All port forwards, firewall settings, and parental controls that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other ZTE ZXHN H288A Guides
This is the reset router guide for the ZTE ZXHN H288A v1.1.1_PH3T4 Globe. We also have the following guides for the same router:
Recover Password in ZTE ZXHN H288A
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the ZTE ZXHN H288A
Usually there is a reset button located on the back or bottom of a router. What you are looking for is something that looks like this:
Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Keep an eye on the lights on the front of your router while holding the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will erase everything you have previously done to this ZTE ZXHN H288A router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the ZTE ZXHN H288A
After you are finished resetting your router, you need to login in using the original factory username and password. Our ZXHN H288A Login Guide has all of the information that you need.
Change Your Password
Be sure to change your router's default password after you get logged back in. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other ZTE ZXHN H288A Guides
Here are some of our other ZTE ZXHN H288A guides that you might be interested in.
This is the reset router guide for the ZTE ZXHN H288A v1.1.1_PH3T4 Globe. We also have the following guides for the same router: