This guide shows you how to reset your ZTE ZXV10 H208L router to factory default settings. This is not the same thing as rebooting a router. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.
Warning: Make sure that you fully understand the following before resetting your router. When you reset your router, the following will happen.
- The router's login credentials are reset to factory defaults.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- All parental controls, firewall settings, and port forwards will be removed.
Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other ZTE ZXV10 H208L Guides
This is the reset router guide for the ZTE ZXV10 H208L. We also have the following guides for the same router:
Recover Password in ZTE ZXV10 H208L
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the ZTE ZXV10 H208L
There is usually a small reset button located on either the back or the bottom of a router. What you are looking for is something that looks like this:
Your reset button may look different, but usually they are very small. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. Do not be concerned about holding the reset button down too long. It will not hurt anything.
Don't forget, this step will totally reset your ZTE ZXV10 H208L router back to factory settings.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the ZTE ZXV10 H208L
After you are finished resetting your router, you need to login in using the original factory username and password. We have a ZXV10 H208L Login Guide with all this information ready for you.
Change Your Password
Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other ZTE ZXV10 H208L Guides
Here are some of our other ZTE ZXV10 H208L guides that you might be interested in.
This is the reset router guide for the ZTE ZXV10 H208L. We also have the following guides for the same router: