How to Reset the ACorp Sprinter LAN420M

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 2 minutes

This guide takes you through the steps on how to reset your ACorp Sprinter-LAN420M router. Resetting the router is not the same as rebooting the router. Rebooting is cycling the power by turning it off and then back on again. Resetting is erasing every personal configuration you have done to this router and reverting it back to factory settings.

Warning: Don't reset your router until you have tried other means of fixing the problem you have. Some things to consider before resetting your router are:

Other ACorp Sprinter LAN420M Guides

This is the reset router guide for the ACorp Sprinter LAN420M.We also have the following guides for the same router:

Reset the ACorp Sprinter LAN420M

First make sure your router is turned on. Then flip it around so you are looking at the back of it.

router reset factory settings
This is the reset page from your ACorp router.

Press and hold the reset button for about 10 seconds using the end of a paperclip or other small object.

This WILL erase all of the personal touches you have made to this ACorp Sprinter-LAN420M router. Don't do this until you have exhausted all your other options.

Login to the ACorp Sprinter LAN420M

After resetting the ACorp Sprinter-LAN420M you should login to it using the default username and password given to you by the router manufacturer. We have a Login Guide that will take you step by step through the process.

Change Your Password

Once you have logged into the ACorp Sprinter-LAN420M it's a good idea to change the router's password so not just anyone can access and change your configurations or security. If you have trouble coming up with a strong and memorable password check out this Password Guide.

Tip: Write this new password down on a piece of paper and tape it to the bottom of the router for future reference.

ACorp Sprinter LAN420M Help

Be sure to check out our other ACorp Sprinter LAN420M info that you might be interested in.

This is the reset router guide for the ACorp Sprinter LAN420M.We also have the following guides for the same router: