This page shows how to change the DNS settings on the Allied Data CopperJet 1616-2P router.
Other Allied Data CopperJet 1616-2P Guides
This is the dns guide for the Allied Data CopperJet 1616-2P. We also have the following guides for the same router:
- Allied Data CopperJet 1616-2P - How to change the IP Address on a Allied Data CopperJet 1616-2P router
- Allied Data CopperJet 1616-2P - Allied Data CopperJet 1616-2P Login Instructions
- Allied Data CopperJet 1616-2P - Allied Data CopperJet 1616-2P User Manual
- Allied Data CopperJet 1616-2P - Allied Data CopperJet 1616-2P Port Forwarding Instructions
- Allied Data CopperJet 1616-2P - How to Reset the Allied Data CopperJet 1616-2P
- Allied Data CopperJet 1616-2P - Information About the Allied Data CopperJet 1616-2P Router
- Allied Data CopperJet 1616-2P - Allied Data CopperJet 1616-2P Screenshots
What is the DNS setting on a Router
When you connect a router to the Internet it gets a few settings from your ISP automatically. One of the settings that the ISP sets in your router is the DNS setting. DNS stands for Domain Name System and it is used to convert Internet names into actual IP addresses. For instance, when you go to "google.com", your are really connecting to an IP address that is mapped through DNS to a number such as:
- 173.194.33.73
This mapping happens automatically every time you visit any page on the Internet.
Why Change Your Router's DNS Setting
Some ISPs choose to abuse the DNS system and map unknown names to servers that they control. This can be done in a way that you don't know it is happening since your router is getting its DNS settings from your ISP. For instance, if you have one of these ISPs who is hijacking your DNS, and you try to surf the web to "some-random-site.com" and "some-random-site.com" does not exist, you might get a page back from your ISP with local advertisements on it.
By changing your DNS setting in your router you will effectively change the DNS setting for every computer on your network. This is because when a device is connected to your network your router automatically hands out its own DNS settings to that device. This way you can protect your entire network from ISP hijacking with just one setting.
What Should I Change My DNS To
There are 2 really great DNS servers on the Internet that you can choose from right now: Google Public DNS and OpenDNS. If you are not sure which one to pick then just use Google Public DNS.
When you change the DNS settings in your router, you usually have to enter a Primary and a Secondary setting. The secondary is only used if the primary can not be located. Here are common settings:
If you want to use Google Public DNS, use the following settings:
- Primary: 8.8.8.8
- Secondary: 8.8.4.4
If you want to use OpenDNS, use the following settings:
- 208.67.222.222
- 208.67.220.220
Login To The Allied Data CopperJet 1616-2P
To get started configuring the Allied Data CopperJet 1616-2P DNS page you need to login to your router. If you are already logged in you can skip this step.
To login to the Allied Data CopperJet 1616-2P, follow our Allied Data CopperJet 1616-2P Login Guide.
Change the DNS settings on a Allied Data CopperJet 1616-2P
If you followed our login guide above then you should see this screen.
You should begin on the Status page of the Allied-Data CopperJet-1616-2P. First, choose the option on the left side of the page labeled Configuration.
This causes a new list of links to appear. Pick the one labeled DNS relay.
Configure the DNS section of your Allied Data CopperJet 1616-2P
You should now be on the DNS Relay page of the Allied-Data CopperJet-1616-2P. Look down this page until you see the heading of Add new DNS server.
In the four boxes labeled New DNS server IP address enter the primary address of the DNS server you have chosen to use. Then, click Apply. This address should now appear in the DNS server list.
Next, enter the secondary address of that same DNS server in the four boxes labeled New DNS server IP address.
Possible Problems when Changing your DNS settings
Most devices on your network will not begin using the new DNS settings until they have been rebooted. After rebooting a device you can go to it's network settings and verify that it is using the DNS servers that you specified.
Other Allied Data CopperJet 1616-2P Info
Don't forget about our other Allied Data CopperJet 1616-2P info that you might be interested in.
This is the dns guide for the Allied Data CopperJet 1616-2P. We also have the following guides for the same router:
- Allied Data CopperJet 1616-2P - How to change the IP Address on a Allied Data CopperJet 1616-2P router
- Allied Data CopperJet 1616-2P - Allied Data CopperJet 1616-2P Login Instructions
- Allied Data CopperJet 1616-2P - Allied Data CopperJet 1616-2P User Manual
- Allied Data CopperJet 1616-2P - Allied Data CopperJet 1616-2P Port Forwarding Instructions
- Allied Data CopperJet 1616-2P - How to Reset the Allied Data CopperJet 1616-2P
- Allied Data CopperJet 1616-2P - Information About the Allied Data CopperJet 1616-2P Router
- Allied Data CopperJet 1616-2P - Allied Data CopperJet 1616-2P Screenshots