Setup Router logo in white Setup router name logo in white
Get Software

Reset the Arris TG1682G

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 8 minutes

In this article, you will learn how to reset your Arris TG1682G back to factory settings. Resetting a router is different than rebooting a router. Turning a router off and back on again causes a reboot. A Router Reset completely erases the router and returns it to factory settings.

Warning: Make sure that you fully understand the following before resetting your router. When you reset your router, the following will happen.

  • The router's login and password are reset.
  • All WiFi information such as network name, password, and authentication method are erased.
  • If your router has any ISP settings they will be removed, and you will have to contact your ISP.
  • Any firewall settings, parental controls, or port forwards that you have configured will be removed.

Resetting your router should be considered the last step. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.

Other Arris TG1682G Guides

This is the reset router guide for the Arris TG1682G TG1682_3.14p13s1_PROD_sey Xfinity. We also have the following guides for the same router:

Recover Password in Arris TG1682G

If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Arris TG1682G

On most routers you can find a small button on the back or the bottom labeled reset. Most reset buttons look like this:

Router Reset Button

Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Do not worry about holding the button down too long; this is harmless.

Just don't forget that this will totally reset your Arris TG1682G router.

This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.

Login to the Arris TG1682G

After you are finished resetting your router, you need to login in using the original factory username and password. Our TG1682G Login Guide has all of the information that you need.

Change Your Password

Be sure to change your router's default password after you get logged back in. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Arris TG1682G Guides

This isn't our only Arris TG1682G guide. We also have the following guides for this router.

This is the reset router guide for the Arris TG1682G TG1682_3.14p13s1_PROD_sey Xfinity. We also have the following guides for the same router: