Setup Router logo in white Setup router name logo in white
Get Software

Reset the Arris TG1682G

Thumbnail image of Setup Router Staff
Setup Router Staff
January 04, 2023 (Last Updated: ) | Reading Time: 8 minutes

This is the reset guide for the Arris TG1682G router. A router reset is very different than a router reboot. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.

Warning: This is not a step to be taken lightly. When you reset your router, the following will happen.

  • The router's login and password are reset.
  • All WiFi settings are reset, including network name and password.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any parental controls, firewall settings, or port forwards will be removed.

A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.

Other Arris TG1682G Guides

This is the reset router guide for the Arris TG1682G TG1682_3.1p3s2_PROD_sey Xfinity. We also have the following guides for the same router:

Recover Password in Arris TG1682G

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Only after you have tried to recover your missing router username and password should you perform a full router reset.

Reset the Arris TG1682G

Most routers have a small button on either the back or the bottom. Most reset buttons look like this:

Router Reset Button

Your reset button may look different, but usually they are very small. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Remember, this will totally reset your Arris TG1682G router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Arris TG1682G

Now you need to log in using the factory default username and password. You can find all of the information that you need in our TG1682G Login Guide.

Change Your Password

After logging in to your router for the first time, you need to change your router's password. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Arris TG1682G Guides

If you want additional help with your Arris TG1682G be sure to check out some of our other guides.

This is the reset router guide for the Arris TG1682G TG1682_3.1p3s2_PROD_sey Xfinity. We also have the following guides for the same router: