Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Atlantis Land A01-AE1 GX01 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Atlantis Land A01-AE1 GX01 router.

Other Atlantis Land A01-AE1 GX01 Guides

This is the ip address guide for the Atlantis Land A01-AE1 GX01. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Atlantis Land A01-AE1 GX01

To get started configuring the Atlantis Land A01-AE1 GX01 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Atlantis Land A01-AE1 GX01, follow our Atlantis Land A01-AE1 GX01 Login Guide.

Change the LAN IP Address on a Atlantis Land A01-AE1 GX01

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Atlantis Land A01-AE1 GX01 router.

When logging into the Atlantis-Land A01-AE1-GX01 you should begin on the Status page.

First, click the tab at the top labeled Interface Setup, then under that in blue LAN.

Configure the LAN section of your Atlantis Land A01-AE1 GX01

router setup
This is the setup page from your Atlantis Land A01-AE1 GX01 router.

Next, in the box labeled IP Address type in your new address you have chosen. We recommend using the address of 192.168.1.1

Make sure to leave the box labeled IP Subnet Mask at 255.255.255.0

You also need to leave the DHCP enabled,this allows your Router to automatically choose from a pool of addresses.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Atlantis Land A01-AE1 GX01 Info

Don't forget about our other Atlantis Land A01-AE1 GX01 info that you might be interested in.

This is the ip address guide for the Atlantis Land A01-AE1 GX01. We also have the following guides for the same router: