On this page I will show you how to reset the AudioCodes MP-264 router back to it's original factory settings. This is usually done because the router setup passwords have been changed and forgotten.
Before we start there are two terms (reset and reboot) that are commonly confused. When you reboot a router you are cycling the power to the device. This does solve some minor behavioral problems the router may be having. A router reset on the other hand takes all the settings in your router, clears them all and returns every one of them back to factory settings.
Warning: Resetting a router can cause all sorts of problems if you don't understand what a reset does. Before continuing please consider the following:
- The Internet name and password are erased and returned to factory settings.
- The router's main username and password are cleared as well.
- If you use a DSL router you need to re-enter the ISP username and password. Call your Internet Service Provider for more information.
- If you have made any other changes to the router you need to write these down so you can re-configure them after the reset is complete.
Other AudioCodes MP-264 Guides
This is the reset router guide for the AudioCodes MP-264. We also have the following guides for the same router:
Reset the AudioCodes MP-264
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
Once you have decided you really want to reset the router you need to know where the reset button is located. Look at the back of the router. We have circled it in red for your convenience.
Take the tip of pin or unfolded paperclip to press and hold the reset button for about 10 seconds. This starts the reset process which could take a minute or more. If you don't hold the reset button down for a full 10 seconds you run the risk of only rebooting the router instead of resetting it.
Please be sure you really want to reset the router. Remember it erases every personal setting you have ever made. If you want to try and avoid a factory reset you should try other troubleshooting methods.
Login to the AudioCodes MP-264
Now that the reset is complete you should login to the AudioCodes MP-264 router using the proper default username and password. These can be found in the Login Guide for the AudioCodes MP-264.
Change Your Password
It's always a good idea to change the default passwords that come with a router. Do this now by using our Choosing a Strong Password guide to help you. It is full of helpful tips and ideas.
Tip: To avoid losing this password you could write it down on a sticky note then attach it to the bottom of the router for next time you need it.
Setup WiFi on the AudioCodes MP-264
Now you can check on the wireless settings. These include the Internet password, the network name, and the security method. We recommend using WPA2 as your security along with a strong password. For more information and step-by-step instructions check out our How to Setup WiFi on the AudioCodes MP-264 guide.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
AudioCodes MP-264 Help
Be sure to check out our other AudioCodes MP-264 info that you might be interested in.
This is the reset router guide for the AudioCodes MP-264. We also have the following guides for the same router: