Setup Router logo in white Setup router name logo in white
Get Software

Reset the Aztech DSL7000GRV

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Aztech DSL7000GRV router. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.

Warning: Since this erases everything you have done to the router, there are some things you need to consider first. The following settings will be changed in your router:

  • The router's username and password are reset.
  • All WiFi settings are reset, including network name and password.
  • Any ISP settings saved in your router will be removed. You may have to contact your ISP.
  • Any port forwards, firewall settings, or parental controls that you have configured will be removed.

Since a router reset is such a drastic step, it should only be done as a last resort when you cannot recover your router's password using any other methods. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Aztech DSL7000GRV Guides

This is the reset router guide for the Aztech DSL7000GRV. We also have the following guides for the same router:

Recover Password in Aztech DSL7000GRV

If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.

Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

Do not do a full router reset until after you have tried every other option to log in to your router.

Reset the Aztech DSL7000GRV

There is usually a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. After a few seconds the lights should blink differently. When this happens, the reset is complete. Do not be concerned about holding the reset button down too long. It will not hurt anything.

Don't forget, this step will totally reset your Aztech DSL7000GRV router back to factory settings.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Aztech DSL7000GRV

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. You can follow the DSL7000GRV Login Guide to find everything that you need to log in.

Change Your Password

Be sure to change your router's default password after you get logged back in. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.

Other Aztech DSL7000GRV Guides

This isn't our only Aztech DSL7000GRV guide. We also have the following guides for this router.

This is the reset router guide for the Aztech DSL7000GRV. We also have the following guides for the same router: