How to change the IP Address on a Baudtec RN243R4-2T2R PLDT router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Baudtec RN243R4-2T2R PLDT router.

Other Baudtec RN243R4-2T2R PLDT Guides

This is the ip address guide for the Baudtec RN243R4-2T2R PLDT.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Baudtec RN243R4-2T2R PLDT

To get started configuring the Baudtec RN243R4-2T2R PLDT LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Baudtec RN243R4-2T2R PLDT, follow our Baudtec RN243R4-2T2R PLDT Login Guide.

Change the LAN IP Address on a Baudtec RN243R4-2T2R PLDT

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Baudtec router.

When you are finished logging into the BaudTec RN243R4-2T2R PLDT router you start on the home page.

To change your router's IP address you need to first click the option at the top of the page labeled Setup.

Then look in the left sidebar. Open up the link of LAN and make sure LAN is highlighted below that.

Configure the LAN section of your Baudtec RN243R4-2T2R PLDT

router IP address lan home network
This is the lan page from your Baudtec router.

You should now be on a page like the one you see here.

The only setting that needs to be changed is the box labeled IP Address. Enter the new IP address you have chosen to use in this box.

Don't make any other changes to this page. Simply click the Apply Changes button to save your changes.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Baudtec RN243R4-2T2R PLDT Info

Don't forget about our other Baudtec RN243R4-2T2R PLDT info that you might be interested in.

This is the ip address guide for the Baudtec RN243R4-2T2R PLDT.We also have the following guides for the same router: