Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the BEC Technologies 5200W

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

In this guide we will talk about how to reset the BEC-Technologies 5200W router to factory defaults. There is a lot of confusion between the terms reset and reboot. A reboot is cycling the power by turning the device off and back on again. A reset takes all your settings and returns them to factory defaults.

Warning: Resetting a router can cause problems if you are not aware of what settings are changed. We recommend making a list of the settings you know will change. Consider the following:

  • The router's main username and password are returned to factory defaults.
  • The WiFi SSID, password, and authentication method are erased and returned to defaults.
  • If you are using DSL you need to re-enter the ISP information. This includes a username and password. To know what these are you probably need to call your ISP.
  • All previously configured are erased. This could include port forwards, IP addresses, or maybe even firewall settings.

Other BEC Technologies 5200W Guides

This is the reset router guide for the BEC Technologies 5200W. We also have the following guides for the same router:

Reset the BEC Technologies 5200W

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN birthday deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

When you decide to reset the BEC-Technologies 5200W router you first need to locate the tiny reset button. Typically this is a recessed button found on the back panel. We have found the placement of it for you and circled it's location in the image below.

router reset factory settings
This is the reset page from your BEC Technologies 5200W router.

While the router is on use a sharp pencil or pen to press and hold the reset button for about 10 seconds. Do not unplug or turn off the router during the reset as that could harm your router.

Remember this erases every setting you have ever changed. Try other troubleshooting methods first.

Login to the BEC Technologies 5200W

After you are through resetting the BEC-Technologies 5200W router you need to login using the proper default IP address, username, and password. We have found these for you and included them in our BEC-Technologies 5200W Login Guide.

Change Your Password

After logging into the router it's a good idea to change the default password. It's never a good idea to leave a password as it's default value. When changing this password if you need help, check out the Choosing a Strong Password guide for ideas and helpful tips.

Tip: As long as your router is in a secure location go ahead and write this password down on a piece of paper and attach it to the underside of the router for future reference.

Setup WiFi on the BEC-Technologies 5200W

Finally let's discuss the WiFi settings. It's easy to forget that these settings have been reset as well. The security method is sometimes disabled as the default and this needs to be changed as soon as possible. If you need help configuring the WiFi check out our How to Setup WiFi on the BEC-Technologies 5200W guide.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN is the fastest VPN deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

BEC Technologies 5200W Help

Be sure to check out our other BEC Technologies 5200W info that you might be interested in.

This is the reset router guide for the BEC Technologies 5200W. We also have the following guides for the same router: