This guide shows you how to reset your Beetel 777VR1 router to factory default settings. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. This is very different from a reset, which erases a router completely and returns it to factory default settings.
Warning: Before you continue, there are a few things you need to know. The following settings will be changed in your router:
- The router's login and password are reset.
- All WiFi settings are reset, including network name and password.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Beetel 777VR1 Guides
This is the reset router guide for the Beetel 777VR1 v01.00.05_10. We also have the following guides for the same router:
Recover Password in Beetel 777VR1
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Do not do a full router reset until after you have tried every other option to log in to your router.
Reset the Beetel 777VR1
There is usually a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the button is under a pinhole, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The lights on the front of the router should do something different when the reset happens. It is harmless to hold the reset button too long.
Keep in mind that this will completely reset your Beetel 777VR1 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Beetel 777VR1
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a 777VR1 Login Guide with all this information ready for you.
Change Your Password
Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Beetel 777VR1 Guides
Here are some of our other Beetel 777VR1 guides that you might be interested in.
This is the reset router guide for the Beetel 777VR1 v01.00.05_10. We also have the following guides for the same router: