How to change the IP Address on a Belkin F5D7234-4 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 6 minutes

This page shows how to change the LAN IP Address on the Belkin F5D7234-4 router.

Other Belkin F5D7234-4 Guides

This is the ip address guide for the Belkin F5D7234-4 v5.We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Belkin F5D7234-4

To get started configuring the Belkin F5D7234-4 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Belkin F5D7234-4, follow our Belkin F5D7234-4 Login Guide.

Change the LAN IP Address on a Belkin F5D7234-4

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Belkin router.

After you have logged into the Belkin F5D7234-4v5 you are placed on the Status page of this Router. To get to the screen where you change your IP Address, the address of your Router, click the choice on the left labeled LAN Setup, then LAN Settings.

Configure the LAN section of your Belkin F5D7234-4

router setup
This is the setup page from your Belkin router.

You are now on the LAN > LAN Settings page of the Belkin F5D7234-4v5. Enter your new address you have picked out for your router in the boxes labeled IP Address. We recommend using an address that ends in a 1 such as 192.168.0.1

Nothing else should change on this page. Simply click the choice at the bottom labeled Apply Changes and you are done.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Belkin F5D7234-4 Info

Don't forget about our other Belkin F5D7234-4 info that you might be interested in.

This is the ip address guide for the Belkin F5D7234-4 v5.We also have the following guides for the same router: