Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Billion Bipac 7401VGPR3

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page covers the basics of how to reset the Billion BiPAC-7401VGPR3 router back to factory default settings. Before we do that we need to go over a couple of easily confused terms. The first is a router reboot. A reboot is a way of saying "cycle the power to the device" or "turning it off, wait a bit, and turn it back on again. This does solve some minor problems you may be having with your router. This guide however covers how to reset the router. A router reset takes every setting and returns them to factory defaults. The router retains nothing that you have put into it, except possibly firmware updates.

Warning: Resetting the Billion BiPAC-7401VGPR3 router is a serious step in fixing a problem. We strongly suggest making a list of settings you know about that will change after this setting. We have started that list for you:

  • The router interface username and password.
  • The Internet name and password.
  • If you use DSL, you need to re-enter the ISP username and password. This information can be obtained by calling your Internet Service Provider.
  • Any other changes made to this router such as port forwards or IP address changes.

Other Billion Bipac 7401VGPR3 Guides

This is the reset router guide for the Billion Bipac 7401VGPR3. We also have the following guides for the same router:

Reset the Billion Bipac 7401VGPR3

Now that you have decided to reset the Billion BiPAC-7401VGPR3 router you need to know where the reset button is located. This tiny recessed button is usually on the back or side panel of the device. We have circled it's location for you in the image below.

router reset factory settings
This is the reset page from your Billion Bipac 7401VGPR3 router.

Take the tip of a pencil or pen and press down on the reset button for about 10 seconds. If you don't hold this button down for the entire time you may end up only rebooting the router instead of resetting it like you wanted.

Don't forget, this WILL erase every single setting you have ever changed on your device. We highly recommend trying other methods of troubleshooting before you consider a reset.

Login to the Billion Bipac 7401VGPR3

Now that you have finished resetting the router you need to login to it using the right default username and password from the factory. We have already found this information for you and included it in our Login Guide for the Billion BiPAC-7401VGPR3 router.

Change Your Password

The next step is to change the default password to something you create. We suggest following the ideas and tips in our Choosing a Strong Password guide.

Tip: After making up a new password you should write it down somewhere you won't lose it. If you keep your router in your place of residence it's okay to write this new password down on a piece of paper and attach it to the bottom of the router.

Setup WiFi on the Billion BiPAC-7401VGPR3

Finally, let' talk about the WiFi settings. These include the SSID/network name, password, and security mode. We recommend checking on these and changing them as needed. You should use WPA2 as the security mode with a nice strong password. For instructions on this check out our guide titled How to Setup WiFi on the Billion BiPAC-7401VGPR3.

Billion Bipac 7401VGPR3 Help

Be sure to check out our other Billion Bipac 7401VGPR3 info that you might be interested in.

This is the reset router guide for the Billion Bipac 7401VGPR3. We also have the following guides for the same router: