How to Reset the Billion BiPAC 7800VDOX

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page I show you how to reset the Billion BiPAC 7800VDOX router back to it's original factory default settings. This is not the same thing as a reboot. A reboot is cycling the power to the device. A reset is taking every setting you have ever changed and reverting it back to factory default settings.

Warning: Resetting this router can cause more problems for you if you don't understand what settings are changed. I recommend making a list of the settings you know will be changed. Consider the following as you make this list.

  • The router's main username and password are restored to the original factory defaults.
  • The Internet name and password are also reverted to factory defaults.
  • If you use a DSL Internet connection you need to re-enter the the ISP username and password. Call your Internet Service Provider for details.
  • Have you made any other changes to this router? If so write these down so you can reconfigure the settings after the reset is complete.

Other Billion BiPAC 7800VDOX Guides

This is the reset router guide for the Billion BiPAC 7800VDOX. We also have the following guides for the same router:

Reset the Billion BiPAC 7800VDOX

The first step is to locate the reset button on this device. As you can see from the image below it is located on the back panel. I circled the reset button in red.

router reset factory settings
This is the reset page from your Billion BiPAC 7800VDOX router.

Due to the small size of the reset button you should use an unfolded paperclip and press down on the reset button for approximately 10 seconds. This starts the reset process. If you don't hold this button down for the entire amount of time you end up only rebooting the router instead of resetting it like you wanted initially.

Remember that this reset WILL erase every single setting you have made to your router. If you want to avoid this inevitable loss you should try other troubleshooting methods first.

Login to the Billion BiPAC 7800VDOX

After you are finished logging into this router you can login. Make sure you uses the factory default login. These values are found in our Login Guide for the Billion BiPAC 7800VDOX.

Tip: If the default username and password don't work you may not have held the reset button down for long enough.

Change Your Password

It's always a good idea to change your default passwords. These passwords are very easy to guess making them terrible passwords. Change this as soon as you can. If you need help making a new password we have a page labeled Choosing a Strong Password to help you.

Tip: It's important that you don't lose this password. One way to keep it close is to write it down on a piece of paper and attach it to the bottom of the device itself.

Setup WiFi on the Billion BiPAC 7800VDOX

The last settings I want to remind you to check are the WiFi settings. These include the Internet name, password, and security type. We highly recommend using WPA2 with a strong password for your Internet connection. For full details on how to do this check out our page labeled How to Setup WiFi on the Billion BiPAC 7800VDOX.

Billion BiPAC 7800VDOX Help

Be sure to check out our other Billion BiPAC 7800VDOX info that you might be interested in.

This is the reset router guide for the Billion BiPAC 7800VDOX. We also have the following guides for the same router: