This page shows how to change the LAN IP Address on the Cisco DPC2320 router.
Other Cisco DPC2320 Guides
This is the ip address guide for the Cisco DPC2320. We also have the following guides for the same router:
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Cisco DPC2320
To get started configuring the Cisco DPC2320 LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Cisco DPC2320, follow our Cisco DPC2320 Login Guide.
Change the LAN IP Address on a Cisco DPC2320
If you followed our login guide above then you should see this screen.
We will start this guide on the Setup page. From here click the Network Configuration option on the left side of the page under Basic Settings.
Configure the LAN section of your Cisco DPC2320
You are now on the correct page to change your Router IP Address. The very first setting on this page under LAN is titled IP Address. Use this box to enter the new address for your router.
That's all there is to it. When you are finished with this one change, go ahead and click the Apply button before exiting.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Cisco DPC2320 Info
Don't forget about our other Cisco DPC2320 info that you might be interested in.
This is the ip address guide for the Cisco DPC2320. We also have the following guides for the same router: