In this article, you will learn how to reset your Cisco RV320 back to factory settings. Resetting a router is different than rebooting a router. Every time your router loses power it reboots. This is different from a reset because a reset completely erases all settings from the router.
Warning: Make sure that you fully understand the following before resetting your router. The following settings in your router will be changed:
- The router's username and password are reset.
- Your WiFi login, password, and network name are reset.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Cisco RV320 Guides
Use a VPN
Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
This is the reset router guide for the Cisco RV320 v1.3.1.12. We also have the following guides for the same router:
Recover Password in Cisco RV320
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
A router reset should be the last thing you try if you are unable to login.
Reset the Cisco RV320
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
You can usually find a small reset button on either the back or the bottom of a router. Look for something that looks like this:
Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. Notice how the lights on the front of the router are blinking. When the lights do something different, the router is reset. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Remember, this will erase everything you have previously done to this Cisco RV320 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Cisco RV320
After you are finished resetting your router, you need to login in using the original factory username and password. We have a RV320 Login Guide with all this information ready for you.
Change Your Password
After logging in to your router for the first time, you need to change your router's password. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Cisco RV320 Guides
This isn't our only Cisco RV320 guide. We also have the following guides for this router.
This is the reset router guide for the Cisco RV320 v1.3.1.12. We also have the following guides for the same router: