Setup Router logo in white Setup router name logo in white
Get Software

Reset the Compal CH7465LG-LC

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 4 minutes

This guide shows you how to reset your Compal CH7465LG-LC router. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. This is different from a reset because a reset completely erases all settings from the router.

Warning: This is not a step to be taken lightly. The following settings in your router will be changed:

  • The router's login credentials are reset.
  • All WiFi login information and network names are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • All port forwards, firewall settings, and parental controls that you have configured will be removed.

A router reset should be considered the last resort when you cannot log in to your router any other way. Before you reset your router you may want to try recovering your router password with our Router Password Finder.

Other Compal CH7465LG-LC Guides

This is the reset router guide for the Compal CH7465LG-LC NCIP-4.50.18.22-1-NOSH UPC. We also have the following guides for the same router:

Recover Password in Compal CH7465LG-LC

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Compal CH7465LG-LC

There is usually a small reset button located on either the back or the bottom of a router. Look at your router and try to find something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.

Watch the lights on the front of your router and hold the reset button down for about 10 seconds. You should notice that the blinking pattern of the lights on the front of the router changes after a few seconds. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.

Keep in mind that this will completely reset your Compal CH7465LG-LC router.

Be sure to only reset your router if you have tried everything else, such as running our Router Password Finder software, which can find your lost or forgotten router password for you.

Login to the Compal CH7465LG-LC

Now that you have finished resetting the router, you need to login to the router interface using the default username and password. We have a CH7465LG-LC Login Guide with all this information ready for you.

Change Your Password

After logging in, you should really change your router's password for added security. It's a very bad idea to leave your router's password set to the factory default. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Compal CH7465LG-LC Guides

If you want additional help with your Compal CH7465LG-LC be sure to check out some of our other guides.

This is the reset router guide for the Compal CH7465LG-LC NCIP-4.50.18.22-1-NOSH UPC. We also have the following guides for the same router: