Have you tried to login to the Digisol DG-BR4000NE router unsuccessfully? It might be time to consider a reset. A reset like the one you will doing is not a reboot. When I reboot is done the router is simply turned off, and back on again. A reset is a complete factory restore of all the settings. Any setting you have ever changed is erased and reverted back to factory defaults.
Warning: Resetting this device is a big step and should not be taken lightly. We strongly recommend creating a list of settings you may of changed in the past. This should include the:
- router username and password
- WiFi information such as SSID and Internet password
- ISP (Internet Service Provider) username and password if this is a DSL router. You have to call your ISP for these details.
- Have you changed any port forwards or IP addresses during the lifetime of this router? All of these should be written down so you don't forget.
Other Digisol DG-BR4000NE Guides
This is the reset router guide for the Digisol DG-BR4000NE. We also have the following guides for the same router:
- Digisol DG-BR4000NE - Digisol DG-BR4000NE Login Instructions
- Digisol DG-BR4000NE - Digisol DG-BR4000NE User Manual
- Digisol DG-BR4000NE - How to change the DNS settings on a Digisol DG-BR4000NE router
- Digisol DG-BR4000NE - Setup WiFi on the Digisol DG-BR4000NE
- Digisol DG-BR4000NE - Digisol DG-BR4000NE Screenshots
- Digisol DG-BR4000NE - Information About the Digisol DG-BR4000NE Router
Reset the Digisol DG-BR4000NE
As you can see from the image below I have found the reset button for the Digisol DG-BR4000NE router. This is the rear panel of the Digisol DG-BR4000NE router. Locate the rest button on the router you are about to reset.
While the router is on, take a straightened paperclip and press down on the button for about 10 seconds. This begins the reset process. The whole process could take a couple of minutes.
Don't forget that this reset erases every single setting you have ever changed on this device. We strongly recommend trying other troubleshooting methods first.
Login to the Digisol DG-BR4000NE
Now that you have reset the Digisol DG-BR4000NE router you need to login to the unit. We have found these for you and have included them in our Login Guide for the Digisol DG-BR4000NE router.
Change Your Password
Once you login to the Digisol DG-BR4000NE router you need to change the default router password. For ideas and tips on how to do this read our Choosing a Strong Password guide.
Tip: To avoid losing this password again you could write it down on a piece of paper and attach it to the bottom side of the Digisol DG-BR4000NE router.
Setup WiFi on the Digisol DG-BR4000NE
Now it's time to begin re-configuring the Digisol DG-BR4000NE router. This needs to include the WiFi settings. Luckily we have a guide just for this router. Check it out here on our How to Setup WiFi on the Digisol DG-BR4000NE page.
Digisol DG-BR4000NE Help
Be sure to check out our other Digisol DG-BR4000NE info that you might be interested in.
This is the reset router guide for the Digisol DG-BR4000NE. We also have the following guides for the same router:
- Digisol DG-BR4000NE - Digisol DG-BR4000NE Login Instructions
- Digisol DG-BR4000NE - Digisol DG-BR4000NE User Manual
- Digisol DG-BR4000NE - How to change the DNS settings on a Digisol DG-BR4000NE router
- Digisol DG-BR4000NE - Setup WiFi on the Digisol DG-BR4000NE
- Digisol DG-BR4000NE - Digisol DG-BR4000NE Screenshots
- Digisol DG-BR4000NE - Information About the Digisol DG-BR4000NE Router