How to Reset the Dlink DAP-1350

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

With this guide I will be showing you how to reset the Dlink DAP-1350 router back to it's original factory defaults. This is not the same thing as a reboot. A reboot is a cycle in the power to the device. A reset is a complete restore back to factory defaults.

Warning: Resetting the Dlink DAP-1350 router can be a problem if you don't understand what it will do. Consider the following before you continue:

Other Dlink DAP-1350 Guides

This is the reset router guide for the Dlink DAP-1350.We also have the following guides for the same router:

Reset the Dlink DAP-1350

Begin by finding the location of the reset button. This tiny button is usually recessed to avoid accidental resets. We have circled it's placement for you in the image below:

router reset factory settings
This is the reset page from your Dlink router.

Take the tip of an unfolded paperclip and press down on the reset button for about 10 seconds to begin the reset process.

Don't forget that this process erases every single setting you have ever changed on your router. If you want to avoid losing all your previously configured data you should try other troubleshooting methods before you reset.

Login to the Dlink DAP-1350

Now that you've reset the Dlink DAP-1350 router you'll need to log into it. You do this by using the default username and password. We have these listed for you in our Login Guide.

Tip: Default not working for you? It could be because you didn't hold the reset button down for long enough.

Change Your Password

Following that we recommend changing the default password. This can be anything you like, however bear in mind that a strong password consists of 14-20 characters and includes no personal information. For more help be sure to visit our Choosing a Strong Password Guide.

Tip: To keep from losing your new password try writing it on a sticky note and attaching it to the bottom of your router.

Setup WiFi on the Dlink DAP-1350

Now is a good time to reconfigure your WiFi settings as well. This includes the SSID/network name, Internet password, and security type. We recommend using WPA2 as your security with a nice strong password to protect your network and Internet access. For more details check out our How to Setup WiFi on the Dlink DAP-1350 guide.

Dlink DAP-1350 Help

Be sure to check out our other Dlink DAP-1350 info that you might be interested in.

This is the reset router guide for the Dlink DAP-1350.We also have the following guides for the same router: