Setup Router logo in white Setup router name logo in white
Get Software

Dlink DAP-1522-Bridge-Mode Login Instructions

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This guide shows you exactly how to login to the Dlink DAP-1522-Bridge-Mode router.

Other Dlink DAP-1522-Bridge-Mode Guides

This is the login guide for the Dlink DAP-1522-Bridge-Mode. We also have the following guides for the same router:

Find Your Dlink DAP-1522-Bridge-Mode Router IP Address

Before you can log in to your Dlink DAP-1522-Bridge-Mode router, you need to figure out it's internal IP address.

Known DAP-1522-Bridge-Mode IP Addresses
192.168.0.50

Choose an IP address from the list above and then follow the rest of this guide.

If you do not find your router's interface later in this guide, then try a different IP address. Keep trying different IP addresses until you find your router. I will not hurt anything to try different IP addresses.

If, after trying all of the above IP addresses, you still cannot find your router, then you can try one of the following steps:

Now that you have your router's internal IP Address, we are ready to login to it.

Login to the Dlink DAP-1522-Bridge-Mode Router

The Dlink DAP-1522-Bridge-Mode router has a web-based interface. The way you manage it is by using a web browser like Firefox, Edge, or Chrome.

Enter Dlink DAP-1522-Bridge-Mode Internal IP Address

Type the internal IP address that you picked above in the address bar of your web browser. The address bar looks like this:

Press the Enter key on your keyboard. You will see a window asking for your Dlink DAP-1522-Bridge-Mode password.

Dlink DAP-1522-Bridge-Mode Default Username and Password

You must know your Dlink DAP-1522-Bridge-Mode username and password in order to log in. If you are not sure what the username and password are, then perhaps they are still set to the factory defaults. All of the default usernames and passwords for the Dlink DAP-1522-Bridge-Mode are listed below.

Dlink DAP-1522-Bridge-Mode Default Usernames and Passwords
UsernamePassword
adminblank

Put your username and password in the appropriate boxes. Put your username and password in the appropriate boxes.

router login screen
This is the login page from your Dlink DAP-1522-Bridge-Mode router.

Dlink DAP-1522-Bridge-Mode Home Screen

When you get logged in you should be at the Dlink DAP-1522-Bridge-Mode home screen, which looks similar to this:

router status mac address internet IP
This is the status page from your Dlink DAP-1522-Bridge-Mode router.

When you see this screen, then you are logged in to your Dlink DAP-1522-Bridge-Mode router. You are now ready to follow one of our other guides.

Solutions To Dlink DAP-1522-Bridge-Mode Login Problems

If you cannot get logged in to your router, here a few possible solutions you can try.

Dlink DAP-1522-Bridge-Mode Password Doesn't Work

Your router's factory default password might be different than what we have listed here. Be sure to try other Dlink passwords. We have an extensive list of all Dlink Passwords that you can try.

Forgot Password to Dlink DAP-1522-Bridge-Mode Router

If your ISP provided your router, then you may have to call them and ask them if they know how to login to your router. Sometimes they will have your password on file.

How to Reset the Dlink DAP-1522-Bridge-Mode Router To Default Settings

If all else fails and you are unable to login to your router, then you may have to reset it to its factory default settings. The last option when you are unable to get logged in to your router is to reset it to the factory defaults.

Other Dlink DAP-1522-Bridge-Mode Guides

Here are some of our other Dlink DAP-1522-Bridge-Mode info that you might be interested in.

This is the login guide for the Dlink DAP-1522-Bridge-Mode. We also have the following guides for the same router: