Setup Router logo in white Setup router name logo in white
Get Software

Reset the Dlink DIR-853/ET

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This guide shows you how to reset your Dlink DIR-853/ET router. A router reset is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.

Warning: Proceed with caution; resetting your router can be a major headache. A router reset will affect the following settings:

  • The router's login and password are reset to factory defaults.
  • All WiFi information such as network name, password, and authentication method are erased.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Dlink DIR-853/ET Guides

This is the reset router guide for the Dlink DIR-853/ET ET853PNP-1.05-B60. We also have the following guides for the same router:

Recover Password in Dlink DIR-853/ET

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.

Router Password Finder - Recover Lost or Forgotten Router Passwords

Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.

Reset the Dlink DIR-853/ET

Most of the time you can find a small reset button located on either the back or the bottom of a router. Look for something that looks like this:

Router Reset Button

Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.

Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The lights on the front of the router should do something different when the reset happens. Do not worry about holding the button down too long; this is harmless.

Keep in mind that this will completely reset your Dlink DIR-853/ET router.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Dlink DIR-853/ET

After you are finished resetting your router, you need to login in using the original factory username and password. You can follow the DIR-853/ET Login Guide to find everything that you need to log in.

Change Your Password

Be sure to change your router's default password after you get logged back in. Leaving a router password set to default is a very serious security risk. Our Choosing a Strong Password guide can help you pick a strong password for your router.

Tip: Write your new password down on a post-it note and stick it to the bottom of your router.

Other Dlink DIR-853/ET Guides

If you want additional help with your Dlink DIR-853/ET be sure to check out some of our other guides.

This is the reset router guide for the Dlink DIR-853/ET ET853PNP-1.05-B60. We also have the following guides for the same router: