This page shows how to change the LAN IP Address on the Dlink DSL-2760U-BN router.
Other Dlink DSL-2760U-BN Guides
This is the ip address guide for the Dlink DSL-2760U-BN. We also have the following guides for the same router:
- Dlink DSL-2760U-BN - Dlink DSL-2760U-BN Login Instructions
- Dlink DSL-2760U-BN - Dlink DSL-2760U-BN User Manual
- Dlink DSL-2760U-BN - How to change the DNS settings on a Dlink DSL-2760U-BN router
- Dlink DSL-2760U-BN - Setup WiFi on the Dlink DSL-2760U-BN
- Dlink DSL-2760U-BN - How to Reset the Dlink DSL-2760U-BN
- Dlink DSL-2760U-BN - Information About the Dlink DSL-2760U-BN Router
- Dlink DSL-2760U-BN - Dlink DSL-2760U-BN Screenshots
What is the LAN IP Address of a Router
The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.
Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.
Common internal IP addresses for routers are:
- 192.168.0.1
- 192.168.1.1
- 10.0.0.1
It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.
Login To The Dlink DSL-2760U-BN
To get started configuring the Dlink DSL-2760U-BN LAN page you need to login to your router. If you are already logged in you can skip this step.
To login to the Dlink DSL-2760U-BN, follow our Dlink DSL-2760U-BN Login Guide.
Change the LAN IP Address on a Dlink DSL-2760U-BN
If you followed our login guide above then you should see this screen.
Once you have logged into the Dlink DSL-2760U-BN you begin on the Device Info page. When you need to change your IP Address, the address you can see while inside your network, click the choice on the left labeled Advanced Setup, then LAN.
Configure the LAN section of your Dlink DSL-2760U-BN
This opens up the Local Area Network (LAN) Setup page. From here, click the box marked IP Address and enter the new address you have chosen for your Router. We would like to recommend using the address of 192.168.1.1
Please leave the Subnet Mask at 255.255.255.0
When you are completely finished making changes, save your work.
Possible Problems when Changing your LAN IP Address
When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.
Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.
Other Dlink DSL-2760U-BN Info
Don't forget about our other Dlink DSL-2760U-BN info that you might be interested in.
This is the ip address guide for the Dlink DSL-2760U-BN. We also have the following guides for the same router:
- Dlink DSL-2760U-BN - Dlink DSL-2760U-BN Login Instructions
- Dlink DSL-2760U-BN - Dlink DSL-2760U-BN User Manual
- Dlink DSL-2760U-BN - How to change the DNS settings on a Dlink DSL-2760U-BN router
- Dlink DSL-2760U-BN - Setup WiFi on the Dlink DSL-2760U-BN
- Dlink DSL-2760U-BN - How to Reset the Dlink DSL-2760U-BN
- Dlink DSL-2760U-BN - Information About the Dlink DSL-2760U-BN Router
- Dlink DSL-2760U-BN - Dlink DSL-2760U-BN Screenshots