Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Dlink DSL-2760U-BN

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page I will be showing you how to reset the Dlink DSL-2760U-BN router back to it's original factory defaults. It's important that you know this is not the same thing as a reboot. When you reboot a router you cycle the power to the device. When you reset a router you take every setting and return them all to factory defaults.

Warning: This is a big step and should not be taken lightly. We strongly recommend making a list of all the settings you know will be changed. Consider the following:

  • The router's main access username and password are erased and returned to factory defaults.
  • The Internet name and password are also put back to the original factory defaults.
  • If this is an DSL router you need to re-enter the ISP (Internet Service Provider) username and password. Call your local ISP for the details.
  • Have you ever changed anything else? Have you forwarded any ports? Have you changed an IP address? These are all erased and need to be reconfigured.

Other Dlink DSL-2760U-BN Guides

This is the reset router guide for the Dlink DSL-2760U-BN. We also have the following guides for the same router:

Reset the Dlink DSL-2760U-BN

Use a VPN

Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN birthday deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

Begin by locating the reset button on the Dlink DSL-2760U-BN router. We have found it for you and circled it in the image below.

router reset factory settings
This is the reset page from your Dlink DSL-2760U-BN router.

Take a bent paperclip and press down on the reset button for about 10 seconds to start the reset. If you only press and release the reset button you might only reboot the device instead of resetting it like you wanted.

Please don't forget the reset will erase every single setting you have changed in the lifetime of this router. If you want to try and avoid all that loss you should exhaust your other troubleshooting methods.

Login to the Dlink DSL-2760U-BN

After you've successfully reset your Dlink DSL-2760U-BN router you'll need to log into it. This is done by using the factory default username and password. Not sure where to find these? We have them listed for you in our Login Guide.

Tip: If the defaults aren't logging you in, don't panic. It could be because the reset button wasn't held down for long enough.

Change Your Password

Once you've logged into the Dlink DSL-2760U-BN router you'll need to set a new password for it. Bear in mind that a strong password contains no personal information and is 14-20 characters in length. For more help check out our Choosing a Strong Password Guide.

Tip: Avoid losing your new password by writing it on a note and taping it to the underside of your router.

Setup WiFi on the Dlink DSL-2760U-BN

It is now time to setup the WiFi settings. We have a great guide on that topic. Check it out here on our How to Setup WiFi on the Dlink DSL-2760U-BN page.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN birthday deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Dlink DSL-2760U-BN Help

Be sure to check out our other Dlink DSL-2760U-BN info that you might be interested in.

This is the reset router guide for the Dlink DSL-2760U-BN. We also have the following guides for the same router: