This guide shows you how to reset your Dlink DSR-250 router. This is not the same thing as rebooting a router. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:
- The router's login credentials are reset.
- All WiFi login information and network names are reset.
- Any ISP settings saved in your router will be removed. You may have to contact your ISP.
- Any parental controls, firewall settings, or port forwards will be removed.
A router reset is the last step you should take in recovering your router's password. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Dlink DSR-250 Guides
This is the reset router guide for the Dlink DSR-250 3.12_WW. We also have the following guides for the same router:
Recover Password in Dlink DSR-250
If the only reason that you are resetting your router is because you forgot your router password, then you may want to try running our Router Password Finder instead of resetting your router.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
A router reset should be the last thing you try if you are unable to login.
Reset the Dlink DSR-250
Usually there is a reset button located on the back or bottom of a router. A typical reset button looks like this:
Even though yours may look slightly different, you need to look for a tiny button. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.
Watch the front panel lights while you hold the reset button down for at least 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. You can hold the button down as long as you like, it will not hurt anything.
Don't forget, this step will totally reset your Dlink DSR-250 router back to factory settings.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Dlink DSR-250
Now you need to log in using the factory default username and password. We have a DSR-250 Login Guide with all this information ready for you.
Change Your Password
After logging in, you should really change your router's password for added security. It is a huge security risk to leave your router's password set to the factory default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Dlink DSR-250 Guides
If you want additional help with your Dlink DSR-250 be sure to check out some of our other guides.
This is the reset router guide for the Dlink DSR-250 3.12_WW. We also have the following guides for the same router: