Setup WiFi on the Dlink DWL-2700APv2

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

The Dlink DWL-2700APv2 router is considered a wireless router because it offers WiFi connectivity. WiFi, or simply wireless, allows you to connect various devices to your router, such as wireless printers, smart televisions, and WiFi enabled smartphones.

Other Dlink DWL-2700APv2 Guides

This is the wifi guide for the Dlink DWL-2700APv2.We also have the following guides for the same router:

WiFi Terms

Before we get started there is a little bit of background info that you should be familiar with.

Wireless Name

Your wireless network needs to have a name to uniquely identify it from other wireless networks. If you are not sure what this means we have a guide explaining what a wireless name is that you can read for more information.

Wireless Password

An important part of securing your wireless network is choosing a strong password.

Wireless Channel

Picking a WiFi channel is not always a simple task. Be sure to read about WiFi channels before making the choice.

Encryption

You should almost definitely pick WPA2 for your networks encryption. If you are unsure, be sure to read our WEP vs WPA guide first.

Login To The Dlink DWL-2700APv2

To get started configuring the Dlink DWL-2700APv2 WiFi settings you need to login to your router. If you are already logged in you can skip this step.

To login to the Dlink DWL-2700APv2, follow our Dlink DWL-2700APv2 Login Guide.

Find the WiFi Settings on the Dlink DWL-2700APv2

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Dlink router.

You start on the System Information page of the Dlink DWL-2700APv2 router. To configure the Wireless settings, click the file in the left sidebar labeled Basic Settings. This opens up a submenu where you need to click Wireless.

Change the WiFi Settings on the Dlink DWL-2700APv2

wifi wireless
This is the wifi setup page from your Dlink router.

This takes you to a page like the one you see here. First, change the SSID. This is referring to the name you give your WiFi network so that you can identify it later on. Go ahead and have fun creating a name that you will remember, but avoid personal info such as names. This name can be seen by others. To learn more about this topic, click the following link, The Wireless Names Guide.

If you want to hide your WiFi name you just created, choose Disable from the drop down menu next to SSID Broadcast. Remember that choosing to hide your SSID does not mean you are completely hidden. With the right program a hacker can still find your network with relative ease.

Next is the Channel. Of the 11 to 14 available channels there is only room for up to three that don't overlap, which causes a lot of interference. Be sure you are on one of these non-overlapping channels, 1,6, or 11. To learn more about these three channels, read our WiFi Channels guide.

Set the Authentication to WPA2-Personal. Click this link to learn more.

At this point, you should be asked for a Passphrase. This is the password you use to gain access to your local network. We recommend using 14-20 characters with a mix of numbers, symbols, and letters. To learn how to create a strong and memorable password, read our guide titled Choosing a Strong Password.

When you are finished, click the button near the bottom of the page labeled Apply.

Possible Problems when Changing your WiFi Settings

After making these changes to your router you will almost definitely have to reconnect any previously connected devices. This is usually done at the device itself and not at your computer.

Other Dlink DWL-2700APv2 Info

Don't forget about our other Dlink DWL-2700APv2 info that you might be interested in.

This is the wifi guide for the Dlink DWL-2700APv2.We also have the following guides for the same router: