On this page I will be showing you how to properly reset the DrayTek Vigor2132FVn router back to it's original factory defaults. A lot of people use the words reset and reboot to mean the same thing. In this guide when I use the word reboot I am only referring to a cycle in the power to the unit. When I use the word reset I am referring to a complete factory restore of all settings. This means any settings you have changed in the past is reverted back to the original factory values.
Warning: All previous settings you have made are erased. Be careful when you decide to reset, it's a big step. We recommend making a list of any settings you may of changed during the lifetime of this router. Some commonly changed settings will include:
- The router's main username and password.
- The Internet name and password.
- If this is a DSL router you need to re-enter the ISP or Internet Service Provider username and password. Call your local ISP for these details.
- Finally you may of made other changes such as port forwards or IP address changes. Don't forget to write these down as well.
Other Draytek Vigor 2132FVn Guides
This is the reset router guide for the Draytek Vigor 2132FVn. We also have the following guides for the same router:
- Draytek Vigor 2132FVn - Draytek Vigor 2132FVn Login Instructions
- Draytek Vigor 2132FVn - Draytek Vigor 2132FVn User Manual
- Draytek Vigor 2132FVn - Setup WiFi on the Draytek Vigor 2132FVn
- Draytek Vigor 2132FVn - Draytek Vigor 2132FVn Screenshots
- Draytek Vigor 2132FVn - Information About the Draytek Vigor 2132FVn Router
Reset the Draytek Vigor 2132FVn
Use a VPN Instead
Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
Take a look at the image below. This should be what the front panel of your DrayTek Vigor2132FVn router looks like. As you can see the Factory Reset button is in the lower left corner of the router.
Take an unwound paperclip and press down on the reset button for about 5 seconds until the ACT light begins to flash faster than before. If you don't hold this button down long enough you will probably end up only rebooting the router instead of resetting it like you wanted.
Remember this reset is erasing every setting you have ever changed on your router. We recommend trying other methods of troubleshooting first.
Login to the Draytek Vigor 2132FVn
Following that you'll need to log into your DrayTek Vigor2132FVn router. This is done by using the factory default username and password provided for your use in our Login Guide.
Tip: Defaults not working for you? It could be because the reset button wasn't held down for long enough.
Change Your Password
After logging into your router we suggest setting a new password for it. This can be whatever you like, however keep in mind that a strong password is 14-20 characters in length and contains no personal information. For more help check out our Choosing a Strong Password Guide.
Tip: Avoid losing your new password by writing it on a sticky note and attaching it to the underside of your router.
Setup WiFi on the DrayTek Vigor2132FVn
Finally you can begin the reconfiguration process. This needs to include the WiFi settings. For a great guide on this topic check out ourHow to Setup WiFi on the DrayTek Vigor2132FVn page.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Draytek Vigor 2132FVn Help
Be sure to check out our other Draytek Vigor 2132FVn info that you might be interested in.
This is the reset router guide for the Draytek Vigor 2132FVn. We also have the following guides for the same router:
- Draytek Vigor 2132FVn - Draytek Vigor 2132FVn Login Instructions
- Draytek Vigor 2132FVn - Draytek Vigor 2132FVn User Manual
- Draytek Vigor 2132FVn - Setup WiFi on the Draytek Vigor 2132FVn
- Draytek Vigor 2132FVn - Draytek Vigor 2132FVn Screenshots
- Draytek Vigor 2132FVn - Information About the Draytek Vigor 2132FVn Router