On this page I will be showing you how to reset the DrayTek Vigor2860n-plus router back to the original factory defaults. A reset like this is not the same thing as a reboot. When you reboot a router you cycle the power to the unit. When you reset a router you take all the settings and return them all to factory defaults.
Warning: A reset like this is a big step and should not be taken lightly. We recommend making a list of all the settings you may of changed in the past. The following should be included in your list.
- The router's main username and password.
- The Internet name and password.
- If this is a DSL router you need to re-enter the ISP username and password. You'll need to call your ISP for this information.
- If you have ever made any other changes make sure to write these down as well.
Other Draytek Vigor2860n-plus Guides
This is the reset router guide for the Draytek Vigor2860n-plus. We also have the following guides for the same router:
- Draytek Vigor2860n-plus - Draytek Vigor2860n-plus Login Instructions
- Draytek Vigor2860n-plus - Draytek Vigor2860n-plus User Manual
- Draytek Vigor2860n-plus - Setup WiFi on the Draytek Vigor2860n-plus
- Draytek Vigor2860n-plus - Draytek Vigor2860n-plus Screenshots
- Draytek Vigor2860n-plus - Information About the Draytek Vigor2860n-plus Router
Reset the Draytek Vigor2860n-plus
Use a VPN
Have you considered using a VPN when you connect to the internet? A VPN is a great way to increase your security and anonymity while surfing.
We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes securely sharing your home network super simple. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.
When shopping for a VPN, make sure that they meet the following criteria:
- Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
- Make sure that your VPN provider has lots of exit nodes all around the world.
- Check that your VPN will not affect your speed.
- Verify that your VPN provider uses WireGuard as the underlying protocol.
- Many people prefer a VPN provider that is not based in the United States.
This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.
Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.
Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.
Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.
Take a look at the image below. Your DrayTek Vigor2860n-plus router should look very similar to this. The reset button is in the lower left corner of the page.
Take a straightened paperclip and press down on the reset button for about 5 seconds until the ACT light begins to flash faster than before. This begins the reset process. If you don't hold the reset button down for long enough you end up only rebooting the router instead of resetting it.
Remember this will erase every setting you have ever changed on your device. We strongly recommend exhausting your other methods of troubleshooting before you decide to reset.
Login to the Draytek Vigor2860n-plus
Once you've successfully reset the DrayTek Vigor2860n-plus router you'll want to log into it. This is done by using the factory default username and password. Don't know where you can find these? We have them listed for your use in our Login Guide.
Tip: If the defaults aren't logging you in it could be because the reset button wasn't held down for long enough.
Change Your Password
Following that we recommend setting a new password for it. This can be anything you want it to be, however bear in mind that a strong password includes no personal information and is 14-20 characters in length. For more help be sure to take a look through our Choosing a Strong Password Guide.
Tip: Prevent yourself from losing your new password by writing it on a sticky note and attaching it to the bottom of your router.
Setup WiFi on the DrayTek Vigor2860n-plus
Now it's time to begin re-configuring the device back to the way you like it. We recommend beginning with the wireless settings. If you want to have a guide helping you with the settings check out our How to Setup WiFi on the DrayTek Vigor2860n-plus page.
Don't forget to sign up for NordVPN's promo deal before it's gone.
You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.
Draytek Vigor2860n-plus Help
Be sure to check out our other Draytek Vigor2860n-plus info that you might be interested in.
This is the reset router guide for the Draytek Vigor2860n-plus. We also have the following guides for the same router:
- Draytek Vigor2860n-plus - Draytek Vigor2860n-plus Login Instructions
- Draytek Vigor2860n-plus - Draytek Vigor2860n-plus User Manual
- Draytek Vigor2860n-plus - Setup WiFi on the Draytek Vigor2860n-plus
- Draytek Vigor2860n-plus - Draytek Vigor2860n-plus Screenshots
- Draytek Vigor2860n-plus - Information About the Draytek Vigor2860n-plus Router