Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the Eltex NTP-RG-1402G-W

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page I will explain how to reset the Eltex NTP-RG-1402G-W router back to the original factory defaults. A reset like this can be confused with a reboot, but they are not the same thing. When I reboot a router I am only cycling the power to the device. When I reset the router I am taking every single setting and returning them to factory defaults.

Warning: A reset erases every single setting and returns it to factory defaults. This is a big step and should not be taken lightly. Make a list of the settings you have changed in the past. Things to consider are:

  • The router's main username and password are reverted to factory defaults.
  • The Internet name and password are erased and reverted to factory defaults.
  • If this is a DSL router you will need to re-enter the Internet Service Provider (ISP) username and password. Call your ISP to find out what these are.
  • Any other changes such as port forwards, IP address changes or DNS server changes are erased. Be sure to reconfigure these after the reset as well.

Other Eltex NTP-RG-1402G-W Guides

This is the reset router guide for the Eltex NTP-RG-1402G-W. We also have the following guides for the same router:

Reset the Eltex NTP-RG-1402G-W

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

To find the reset button you should turn the router around so you are looking at the back panel. Most reset buttons are more like pinholes and I have circled what I believe to be the reset button in the image below.

router reset factory settings
This is the reset page from your Eltex NTP-RG-1402G-W router.

While the router is on take a pin or straightened paperclip and press down on the reset button for about 10 seconds. If you don't hold the reset button down for long enough you end up only rebooting the device instead of resetting it like you wanted.

Don't forget this reset is going to erase every single setting you have ever changed on the Eltex NTP-RG-1402G-W router. We strongly recommend trying other ways of fixing your problem before resorting to a reset.

Login to the Eltex NTP-RG-1402G-W

Now that you've reset the Eltex NTP-RG-1402G-W router you'll need to log into it. This is accomplished by using the factory default username and password. Not sure where to find these? We have them listed for you in our Login Guide.

Tip: If the defaults aren't working for you it could be because the reset button wasn't held down for long enough.

Change Your Password

Once you've logged into your router we recommend setting a new password for it. This can be anything you want it to be, however keep in mind that a strong password is 14-20 characters in length and includes no personal information. For more help check out our Choosing a Strong Password Guide.

Tip: Keep from losing your new password by writing it on a slip of paper and taping it to the underside of your router.

Setup WiFi on the Eltex NTP-RG-1402G-W

You can now begin the reconfiguration process. Don't forget the WiFi settings. For an easy to follow guide check out our How to Setup WiFi on the Eltex NTP-RG-1402G-W page.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN birthday deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Eltex NTP-RG-1402G-W Help

Be sure to check out our other Eltex NTP-RG-1402G-W info that you might be interested in.

This is the reset router guide for the Eltex NTP-RG-1402G-W. We also have the following guides for the same router: