How to change the IP Address on a Encore ENHWI-N3 router

This page shows how to change the LAN IP Address on the Encore ENHWI-N3 router.

Other Encore ENHWI-N3 Guides

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Encore ENHWI-N3

To get started configuring the Encore ENHWI-N3 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Encore ENHWI-N3, follow our Encore ENHWI-N3 Login Guide.

Change the LAN IP Address on a Encore ENHWI-N3

If you followed our login guide above then you should see this screen.

After you have logged into the Encore ENHWI-N3 you begin on the Main Menu. To change your IP Address, the address you can see while inside the network, click the System choice, on the left in red. Then at the top of the page in grey, click the choice of LAN.

Configure the LAN section of your Encore ENHWI-N3

Then, place your cursor in the box marked IP Address and enter the new address here. We would like to suggest using the address of 192.168.1.1

Leave the IP Subnet Mask at 255.255.255.0

Before exiting, you will need to click Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Encore ENHWI-N3 Info

Don't forget about our other Encore ENHWI-N3 info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for SetupRouter.com. She is available on Google+ and you can find more of her articles in the Networking section of our site.