Setup Router logo in white Setup router name logo in white
Get Software

How to Reset the EnGenius ESR 9752

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

On this page we show you how to reset the EnGenius ESR-9752 router back to factory defaults. A lot of people assume this is the same thing as a reboot. A reboot is a cycle in the power to the unit. This solves a lot of minor behavioral problems you might experience with the EnGenius ESR-9752 router. A reset on the other hand takes all the settings and reverts every one of them back to factory defaults. This means every setting you have ever changed is erased and reverted back to the original factory defaults.

Warning: A reset is a big step in trying to login to your router. Are you sure you want to continue? Things you need to consider before continuing are:

  • The router's main username and password are erased and returned to how they were from the factory.
  • The wireless information such as IP address, network name and password are erased and returned to factory defaults.
  • If this happens to be a DSL router you need to re-enter the ISP (Internet Service Provider) username and password. You need to call your ISP to find out what the username and password are.
  • Have you ever forwarded any ports or changed any IP addresses?

Other EnGenius ESR 9752 Guides

This is the reset router guide for the EnGenius ESR 9752. We also have the following guides for the same router:

Reset the EnGenius ESR 9752

It is now time to find the reset button on the back panel. If you look at the image below you can see I have circled the reset button for you in red.

router reset factory settings
This is the reset page from your EnGenius ESR 9752 router.

While the EnGenius ESR-9752 router is on, take a straightened paperclip and press down on the reset button for about 10 seconds. This begins the reset process which could take a minute or more to finish. If you simply press and release the reset button you will reboot the router instead of resetting it like you wanted.

Don't forget that this reset is going to erase every single setting you have ever changed. We suggest trying other methods of troubleshooting before you continue with this reset.

Login to the EnGenius ESR 9752

Once you've reset the EnGenius ESR-9752 router you should log into it. This is done by using the factory default username and password. Don't know where to find these? We have them listed for your use in our Login Guide.

Tip: If the defaults aren't logging you in it could be because the reset button wasn't held down for long enough.

Change Your Password

After you've logged into your router we recommend setting a new password for it. Keep in mind that this password will only protect your router settings, not your wireless network. All the same, setting a strong password is always a wise choice. For more help be sure to visit our Choosing a Strong Password Guide.

Tip: Avoid losing your new password by writing it on note and taping it to the bottom of your router.

Setup WiFi on the EnGenius ESR-9752

While re-configuring the router back to the way you had it, don't forget about the wireless settings. We have an easy to read guide for you if you're interested. Take a moment to look it over here on our How to Setup WiFi on the EnGenius ESR-9752 page.

EnGenius ESR 9752 Help

Be sure to check out our other EnGenius ESR 9752 info that you might be interested in.

This is the reset router guide for the EnGenius ESR 9752. We also have the following guides for the same router: