In this article, you will learn how to reset your Everest EWR-301 back to factory settings. This is a much bigger deal than a router reboot. Unplugging a router from the wall reboots it. However, when you reset a router you, return it back to its factory default settings.
Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:
- The router's login credentials are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. You should be sure that you have tried to at least recover your router password using our Router Password Finder before resorting to a router reset.
Other Everest EWR-301 Guides
This is the reset router guide for the Everest EWR-301. We also have the following guides for the same router:
Recover Password in Everest EWR-301
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Router Password Finder can save you a ton of time by recovering your lost or forgotten router password instead of doing a full router reset.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Everest EWR-301
Most of the time you can find a small reset button located on either the back or the bottom of a router. Look for something that looks like this:
Yours may look slightly different, but they are usually tiny. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. After a few seconds the lights should blink differently. When this happens, the reset is complete. You cannot hold the button too long, and it will not hurt the router to hold the reset button down for longer than 10 seconds.
Keep in mind that this will completely reset your Everest EWR-301 router.
Only take this last step of fully resetting your router after you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the Everest EWR-301
Now you need to log in using the factory default username and password. Our EWR-301 Login Guide has all of the information that you need.
Change Your Password
Do not forget to change your router's default password when you log back into it. It's a very bad idea to leave your router's password set to the factory default. If you need help coming up with a strong password, check out our Choosing a Strong Password guide.
Tip: Write your new password down on a post-it note and stick it to the bottom of your router.
Other Everest EWR-301 Guides
Here are some of our other Everest EWR-301 guides that you might be interested in.
This is the reset router guide for the Everest EWR-301. We also have the following guides for the same router: