Setup Router logo in white Setup router name logo in white
Get Software

Reset the Fiber Home AN5506-04-FA

Thumbnail image of Setup Router Staff
Setup Router Staff
Last Updated: | Reading Time: 3 minutes

This is the reset guide for the Fiber Home AN5506-04-FA router. A router reset is very different than a router reboot. Every time your router loses power it reboots. A Router Reset completely erases the router and returns it to factory settings.

Warning: This is not a step to be taken lightly. The following settings in your router will be changed:

  • The router's username and password are reset to factory defaults.
  • Your WiFi login, password, and network name are reset.
  • Your ISP settings are reset, which means you will have to contact your ISP to get them back.
  • Any firewall settings, parental controls, and port forwards that you have configured will be removed.

Resetting your router should be considered the last step. Make sure that you have tried to recover your router password using our Router Password Finder first.

Other Fiber Home AN5506-04-FA Guides

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN is the fastest VPN!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

This is the reset router guide for the Fiber Home AN5506-04-FA RP2627 PLDT. We also have the following guides for the same router:

Recover Password in Fiber Home AN5506-04-FA

Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.

Router Password Finder is designed from the ground up to help you recover your forgotten router username and password, which can save you a lot of time.

Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords

If you are unable to recover your lost router password, then you may have to proceed with a full router reset.

Reset the Fiber Home AN5506-04-FA

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN is the fastest VPN deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

There is usually a small reset button located on either the back or the bottom of a router. A typical reset button looks like this:

Router Reset Button

Your reset button may look different, but usually they are very small. Sometimes the reset button is under a pinhole on the back of the router, and you need a paper clip to push it.

Hold the reset button down for 10 seconds and watch the lights. The blinking pattern of the lights on the front of the router should change when the reset is complete. It is harmless to hold the reset button too long.

Don't forget, this step will totally reset your Fiber Home AN5506-04-FA router back to factory settings.

Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.

Login to the Fiber Home AN5506-04-FA

Now you need to log in using the factory default username and password. Our AN5506-04-FA Login Guide has all of the information that you need.

Change Your Password

You need to change your router's default password after you log in for the first time. Leaving a router password set to default is a very serious security risk. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.

Tip: Put your new password on a post-in note and stick it to the bottom of your router.

Other Fiber Home AN5506-04-FA Guides

Here are some of our other Fiber Home AN5506-04-FA guides that you might be interested in.

This is the reset router guide for the Fiber Home AN5506-04-FA RP2627 PLDT. We also have the following guides for the same router: