How to change the IP Address on a FiberHome AN5506-04-F2 router

This page shows how to change the LAN IP Address on the FiberHome AN5506-04-F2 router.

Other FiberHome AN5506-04-F2 Guides

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

It is generally a good idea to make the last number of your router's internal IP address a '1', as in or This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The FiberHome AN5506-04-F2

To get started configuring the FiberHome AN5506-04-F2 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the FiberHome AN5506-04-F2, follow our FiberHome AN5506-04-F2 Login Guide.

Change the LAN IP Address on a FiberHome AN5506-04-F2

If you followed our login guide above then you should see this screen.

To change your Router's IP Address, the address you see while inside your network, first log into the FiberHome AN5506-04-F2. This places you on the Status page of your Router. Next, click Network, this is at the top of the page. Then click LAN Settings on the left side of the screen.

Configure the LAN section of your FiberHome AN5506-04-F2

You are now on a screen called LAN Setup. Enter your new IP Address in the box labeled IP Address. One choice is

Leave the Subnet Mask at and the NAT and DNS Relay both enabled. Simply click Apply and you are finished.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other FiberHome AN5506-04-F2 Info

Don't forget about our other FiberHome AN5506-04-F2 info that you might be interested in.

Rachel Bauer

Written by

Rachel Bauer is an owner and primary author for She is available on Google+ and you can find more of her articles in the Networking section of our site.