This is the reset guide for the FRITZ WLAN 7360 router. This is a much bigger deal than a router reboot. Rebooting a router is simply turning it off and back on again. A Router Reset completely erases the router and returns it to factory settings.
Warning: Make sure that you fully understand the following before resetting your router. A router reset will affect the following settings:
- The router's username and password are reset.
- All WiFi information such as network name, password, and authentication method are erased.
- If your router has any ISP settings they will be removed, and you will have to contact your ISP.
- Any firewall settings, parental controls, and port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other FRITZ WLAN 7360 Guides
This is the reset router guide for the FRITZ WLAN 7360. We also have the following guides for the same router:
Recover Password in FRITZ WLAN 7360
Instead of resetting your router back to factory settings, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the FRITZ WLAN 7360
Most of the time you can find a small reset button located on either the back or the bottom of a router. Most reset buttons look like this:
Yours may look slightly different, but they are usually tiny. You may need a paper clip to push the reset button.
Hold the reset button down for about 10 seconds while watching the lights on the front of your router. The lights on the front of the router should do something different when the reset happens. It is harmless to hold the reset button too long.
Remember, this will totally reset your FRITZ WLAN 7360 router.
Only do this once you have exhausted all other troubleshooting options, such as running our Router Password Finder software, which can recover a lost router password for you.
Login to the FRITZ WLAN 7360
Now that you have finished resetting the router, you need to login to the router interface using the default username and password. Just follow our WLAN 7360 Login Guide to find all of the information that you need.
Change Your Password
You need to change your router's default password after you log in for the first time. It's a very bad idea to leave your router's password set to the factory default. Our Choosing a Strong Password guide can help you pick a strong password for your router.
Tip: Put your new password on a post-in note and stick it to the bottom of your router.
Other FRITZ WLAN 7360 Guides
This isn't our only FRITZ WLAN 7360 guide. We also have the following guides for this router.
This is the reset router guide for the FRITZ WLAN 7360. We also have the following guides for the same router: