In this article, you will learn how to reset your Gemtek WLTFSR-115GN Ooredoo back to factory settings. Resetting a router is different than rebooting a router. Rebooting a router is simply turning it off and back on again. Resetting a router erases all settings from it and returns it to factory defaults.
Warning: This is not a step to be taken lightly. A router reset will affect the following settings:
- The router's login credentials are reset.
- All WiFi login information and network names are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
A router reset should be considered the last resort when you cannot log in to your router any other way. Make sure that you have tried to recover your router password using our Router Password Finder first.
Other Gemtek WLTFSR-115GN Ooredoo Guides
This is the reset router guide for the Gemtek WLTFSR-115GN Ooredoo. We also have the following guides for the same router:
Recover Password in Gemtek WLTFSR-115GN Ooredoo
If you are resetting your router because you forgot your router password, then you should try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Automatically Recover Lost or Forgotten Router Passwords
Only after you have tried to recover your missing router username and password should you perform a full router reset.
Reset the Gemtek WLTFSR-115GN Ooredoo
Most routers have a small button on either the back or the bottom. Look for something that looks like this:
Reset buttons are usually tiny. Yours may look slightly different than this. If you find a pinhole on the back of the router then that may be the reset button. You will need a paper clip to push it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. The blinking pattern of the lights on the front of the router should change when the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will erase everything you have previously done to this Gemtek WLTFSR-115GN Ooredoo router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Gemtek WLTFSR-115GN Ooredoo
Now that you have finished resetting your router, you need to log in using the default username and password from the factory. You can find all of the information that you need in our WLTFSR-115GN Ooredoo Login Guide.
Change Your Password
You need to change your router's default password after you log in for the first time. The factory default passwords for routers are very well known. You can follow our Choosing a Strong Password guide to help you pick a solid password for your router.
Tip: A great place to write your new password down is on a piece of paper taped to the bottom of your router.
Other Gemtek WLTFSR-115GN Ooredoo Guides
If you want additional help with your Gemtek WLTFSR-115GN Ooredoo be sure to check out some of our other guides.
This is the reset router guide for the Gemtek WLTFSR-115GN Ooredoo. We also have the following guides for the same router: