How to Reset the Hitron-Technologies BVW-3653

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

Have you tried to login to the Hitron-Technologies BVW-3653 router and been unsuccessful? You might need to reset the Hitron-Technologies BVW-3653 router back to the original factory defaults.

The type of reset I am writing about is nothing like a reboot. In this guide when I refer to a reboot I am referring to a cycle in the power to the unit. When I refer to a reset I am referring to a complete factory restore of all settings. This means every single setting you have ever changed in the history of this device is erased and returned to how it was when it left the factory.

Warning: This reset is a big step and should not be taken lightly. We recommend making a list of all the settings you may of changed before continuing.

  • The router's main username and password.
  • The Wireless information such as SSID and Internet password.
  • If this is a DSL router you need to re-enter the ISP (Internet Service Provider) username and password. Call your ISP for the details.
  • Have you ever made any other changes to the router? How about port forwards or IP address changes.

Other Hitron-Technologies BVW-3653 Guides

This is the reset router guide for the Hitron-Technologies BVW-3653. We also have the following guides for the same router:

Reset the Hitron-Technologies BVW-3653

Below the reset button/pinhole is circled in red for you. It should be on one of the side panels of the Hitron-Technologies BVW-3653 router.

router reset factory settings
This is the reset page from your Hitron-Technologies BVW-3653 router.

First of all, make sure the router is on. Then take a straightened paperclip and press down on the reset button for about 10 seconds. If you hold this button down for less time you will only reboot the router instead of resetting it like you wanted.

Don't forget a reset like this one is going to erase every single setting you have ever changed in the history of this device. We strongly recommend trying other methods of troubleshooting before you continue.

Login to the Hitron-Technologies BVW-3653

Following that you'll need to log into your Hitron-Technologies BVW-3653 router. This is done by using the factory default username and password. Don't know where you can find these? We have them listed for your use in our Login Guide.

Tip: If the defaults aren't logging you in it could be because the reset button wasn't held down for long enough.

Change Your Password

Once you've reset and logged into your router we recommend setting a new password for it. Bear in mind that this password will only protect your router settings, not your wireless network. All the same, setting a strong password is always a good idea. For more help be sure to visit our Choosing a Strong Password Guide.

Tip: Afraid of losing your new password? Try writing it on a sticky note and attaching it to the underside of your router.

Setup WiFi on the Hitron-Technologies BVW-3653

You can now begin the reconfiguration process. For wireless routers such as the Hitron-Technologies BVW-3653 you need to be sure your network is secure. We have a great guide that walks you through the steps. Check it out in our Hitron-Technologies BVW-3653 WiFi Instructions.

Hitron-Technologies BVW-3653 Help

Be sure to check out our other Hitron-Technologies BVW-3653 info that you might be interested in.

This is the reset router guide for the Hitron-Technologies BVW-3653. We also have the following guides for the same router: