Setup Router logo in white Setup router name logo in white
Get Software

How to change the IP Address on a Hitron Technologies BWG-35302 router

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

This page shows how to change the LAN IP Address on the Hitron Technologies BWG-35302 router.

Other Hitron Technologies BWG-35302 Guides

This is the ip address guide for the Hitron Technologies BWG-35302 4.03.14-xx. We also have the following guides for the same router:

What is the LAN IP Address of a Router

The LAN IP Address of a router is also known as its internal IP address. It is also the IP address that you connect to when you want to configure your router. It is only useful from inside your network and has no use from the Internet side.

Routers have 2 IP addresses: an internal ip address and an external ip address. The external IP address is assigned to you by your Internet Service Provider, or ISP, and is generally not something that you can change. The internal IP address is set to a default value at the factory but can be changed if you want.

Common internal IP addresses for routers are:

  • 192.168.0.1
  • 192.168.1.1
  • 10.0.0.1

It is generally a good idea to make the last number of your router's internal IP address a '1', as in 192.168.0.1 or 10.0.0.1. This is not necessary, but many people do it and it makes it a bit easier to remember which IP address is assigned to your router. If you want to change the internal IP address of your router, this guide shows you how.

Login To The Hitron Technologies BWG-35302

To get started configuring the Hitron Technologies BWG-35302 LAN page you need to login to your router. If you are already logged in you can skip this step.

To login to the Hitron Technologies BWG-35302, follow our Hitron Technologies BWG-35302 Login Guide.

Change the LAN IP Address on a Hitron Technologies BWG-35302

If you followed our login guide above then you should see this screen.

router status mac address internet IP
This is the status page from your Hitron Technologies BWG-35302 router.

When you are logged into the Hitron Technologies BWG-35302 you begin on the Status page. When you need to change your IP Address for your Router, you must first click the choice on the left labeled LAN.

Configure the LAN section of your Hitron Technologies BWG-35302

router setup
This is the setup page from your Hitron Technologies BWG-35302 router.

This opens up the page labeled LAN Settings. Place your cursor in the box marked IP Address and type in your new address. Our recommendation for your Router is to use the address of 192.168.0.1

Don't change the IP Subnet Mask, it should remain at 255.255.255.0, the DHCP Server should likewise remain enabled.

when you are finished making changes to your Router, please click Apply.

Possible Problems when Changing your LAN IP Address

When you change your LAN IP Address you are making a fundamental change to how your network functions and all computers on your network will be affected. You will lose your Internet connection when you apply these changes. Your router may reboot and require a couple of minutes to start responding again.

Also note that some computers may need to be rebooted after you make this change before they can talk to the router or on the Internet again.

Other Hitron Technologies BWG-35302 Info

Don't forget about our other Hitron Technologies BWG-35302 info that you might be interested in.

This is the ip address guide for the Hitron Technologies BWG-35302 4.03.14-xx. We also have the following guides for the same router: