This guide shows you how to reset your Huawei B2368-66 router to factory default settings. A router reset is very different than a router reboot. A reboot happens every time a router loses power. This is different from a reset because a reset completely erases all settings from the router.
Warning: Proceed with caution; resetting your router can be a major headache. The following settings will be changed in your router:
- The router's login credentials are reset.
- All WiFi login information and network names are reset.
- Your ISP settings are reset, which means you will have to contact your ISP to get them back.
- Any firewall settings, parental controls, or port forwards that you have configured will be removed.
Resetting your router should be considered the last step. Before you reset your router, you may want to try recovering your router password with our Router Password Finder.
Other Huawei B2368-66 Guides
This is the reset router guide for the Huawei B2368-66 V100R001C00SPC033. We also have the following guides for the same router:
- Huawei B2368-66 V100R001C00SPC033 - Huawei B2368-66 Screenshots
- Huawei B2368-66 V100R001C00SPC033 - Information About the Huawei B2368-66 Router
- Huawei B2368-66 V100R001C00SPC033 - Login to the Huawei B2368-66
Recover Password in Huawei B2368-66
Before you resort to doing a full router reset, you may want to try running our Router Password Finder first.
Our Router Password Finder can recover your lost or forgotten router password without doing a full router reset, which can save you lots of time.
Router Password Finder - Lost or Forgotten Router Password Recovery Tool
Just keep in mind that a router reset should be done as the last resort when you are unable to login to your router.
Reset the Huawei B2368-66
You can usually find a small reset button on either the back or the bottom of a router. A typical reset button looks like this:
Yours may look slightly different, but they are usually tiny. You might find a pinhole on the back of the router that requires a paper clip to push the button hidden under it.
Watch the lights on the front of your router and hold the reset button down for about 10 seconds. After a few seconds the lights should blink differently. When this happens, the reset is complete. Keep holding the button as long as you want, it will not hurt anything to hold it down too long.
Remember, this will totally reset your Huawei B2368-66 router.
This last step should only be taken if you have tried everything else, such as using our Router Password Finder software, which can recover lost or forgotten router passwords.
Login to the Huawei B2368-66
Now you need to log in using the factory default username and password. Our B2368-66 Login Guide has all of the information that you need.
Change Your Password
You need to change your router's default password after you log in for the first time. Since factory passwords are well known, it's a huge security risk to leave your router set to the default. Our Choosing a Strong Password guide talks about choosing a strong password for your router.
Tip: After creating this new password, we highly recommend writing this down on a post-it note and attaching it to the bottom of your router for future reference.
Other Huawei B2368-66 Guides
If you want additional help with your Huawei B2368-66 be sure to check out some of our other guides.
This is the reset router guide for the Huawei B2368-66 V100R001C00SPC033. We also have the following guides for the same router:
- Huawei B2368-66 V100R001C00SPC033 - Huawei B2368-66 Screenshots
- Huawei B2368-66 V100R001C00SPC033 - Information About the Huawei B2368-66 Router
- Huawei B2368-66 V100R001C00SPC033 - Login to the Huawei B2368-66