How to Reset the Huawei B68L

Thumbnail image of Setup Router Staff
Setup Router Staff
(Last Updated: ) | Reading Time: 3 minutes

If you have been unsuccessful in trying to login to the Huawei B68L router, it might be time to consider a reset. A reset like the one I will be showing you on this page is different from a reboot. These two terms are confused quite often. A reboot is a cycle in the power to the unit. You unplug the power and leave it unplugged for about 30 seconds. Then plug it back in and wait for it to start up again. That is a reboot. When you reset a router you take all the settings that have been changed and return every one of them back to how they were from the factory.

Warning: Resetting this router is a big step and you should not take it lightly. We strongly recommend trying other troubleshooting methods. We also recommend creating a list of settings that may be changed. Some of these settings include:

  • The router's main username and password.
  • The network SSID and Internet password.
  • If this is a DSL router you need to re-enter the Internet Service Provider username and password. Call your ISP for the details.
  • Have you made any other changes to your router? If so you need to write these down as well.

Other Huawei B68L Guides

This is the reset router guide for the Huawei B68L. We also have the following guides for the same router:

Reset the Huawei B68L

Use a VPN Instead

Have you considered using a VPN instead of forwarding a port? For most users, a VPN is a much simpler and more secure choice than forwarding a port.

We use and recommend NordVPN because not only is it the fastest VPN, it includes a new feature called Meshnet that makes forwarding a port no longer necessary for most applications. With NordVPN Meshnet, you can connect to your devices from anywhere in the world, completely secure, over a highly encrypted VPN tunnel.

When shopping for a VPN, make sure that they meet the following criteria:

  • Your VPN provider should have a no-logs policy. This means that they do not keep any logs of any kind.
  • Make sure that your VPN provider has lots of exit nodes all around the world.
  • Check that your VPN will not affect your speed.
  • Verify that your VPN provider uses WireGuard as the underlying protocol.
  • Many people prefer a VPN provider that is not based in the United States.

This is the list of requirements that we used when we were shopping around for a VPN provider. There are lots of free, shady VPN providers out there that we looked at and dismissed.

Based in Panama, using diskless servers, and with over 6,100 servers in 61 countries, we can safely say that NordVPN satisfies all of these requirements.

NordVPN faster than ever deal!

Once you've set up your NordVPN account on multiple computers and enabled Meshnet, you can seamlessly access all of your devices as if they were on the same network. You don't even have to log in to your router. It's very simple.

Every time you click on one of our affiliate links, such as NordVPN, we get a little kickback for introducing you to the service. Think of us as your VPN wingman.

Below is the underside of the Huawei B68L router. Notice the tiny little reset button/pinhole. I have circled it in red for you.

router reset factory settings
This is the reset page from your Huawei B68L router.

While the Huawei B68L router is on take a straightened paperclip or other similar object and press down on the reset button until the lights on the front of the device begin blinking. This usually takes a few seconds. If you don't hold the reset button down long enough you might end up only rebooting the router instead of resetting it like you wanted.

Warning: DO NOT unplug or turn off the router during the reset process. Doing so could result in permanent damage to your router.

Please remember a reset like this one erases every single setting you have ever changed in the past. We strongly recommend trying other methods of troubleshooting before you continue.

Login to the Huawei B68L

It is now time to login to the Huawei B68L router. Use the default router values. These include the router's IP address, username and password. Check out our Login Guide for the Huawei B68L.

Tip: If the defaults didn't work it is possible you didn't hold the reset button down for long enough. Try again but hold the reset button down for a little longer this time.

Change Your Password

Once you have logged into the Huawei B68L router you need to change the router's default password. Follow the guidelines in our Choosing a Strong Password guide for helpful tips.

Tip: One way to avoid losing this password is to write it down on a slip of paper and attach it to the bottom of the device.

Setup WiFi on the Huawei B68L

Finally you can check and change as needed the wireless settings. We have a guide you can follow if you want. Check it out in our How to Setup WiFi on the Huawei B68L.

Don't forget to sign up for NordVPN's promo deal before it's gone.

NordVPN is the fastest VPN deal!

You might notice that most of our site doesn't have ads on it. This is because we use partnerships with companies like NordVPN to keep the site running. Thank you for supporting us by using our referral links.

Huawei B68L Help

Be sure to check out our other Huawei B68L info that you might be interested in.

This is the reset router guide for the Huawei B68L. We also have the following guides for the same router: